Kenwood KDC-W6027 Instruction Manual

Also see for KDC-W6027: Service manual Service manual

24 | EnglishMenu systemSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.• It takes 3 to 4 minutes to synchronize the clock.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.Selectable IlluminationSelecting the button illumination color as greenor red.Display Setting"Color Red" The illumination color is red."Color Green" The illumination color is green.Switching Display TypeSetting the Display type.Display Setting"DisplayC" Demonstration."DisplayA" Normal display type."DisplayB" Silent display type.Function of the KDC-WV6027Illumination Color SettingYou can set the display to a desired color.1 Select Illumination Color Setting ModePress the [FM] or [AM] button.Select the "COL" display.2 The color continues to change graduallyHold down on the [4] or [¢] button.Release your finger at the color you want.• Colors adjusted using either [4] or [¢] will bestored automatically, and they can be called bypressing [5] button.Quick call up the preset colorPress the desired [1] — [4] button.Button Color[1] Silky White[2] Red[3] Blue[4] Blue GreenSelecting the Color modePress the [6] button.Each time the button is pressed the Color modeswitches as shown below.Display Color mode"Scan" The color changes in sequence."SRC" The color changes according to the selected source."Time" The color changes every 6 hours.Keeps the presently set color.Blue fine adjustment1 Press the [3] button for at least 2 seconds.2 Press the [4] or [¢] button.When the blue fine adjustment is completed,press the [3] button.