Kenwood KDC-W6027 Instruction Manual

Also see for KDC-W6027: Service manual Service manual

The messages shown below display yoursystems condition.EJECT: No disc magazine has been loaded inthe changer. The disc magazine is notcompletely loaded.➪ Load the disc magazine properly.No CD in the unit.➪ Insert the CD.No Disc: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.TOC Error: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.➪ Clean the CD and load it correctly.E-05: The CD is upside-down.➪ Load the CD correctly.Blank Disc: Nothing has been recorded on the MD.No Track: No tracks are recorded on the MD,although it has a title.E-15: Media was played that doesn't have datarecorded that the unit can play.➪ Use media that has data recorded thatthe unit can play.No Panel: The faceplate of the slave unit beingconnected to this unit has been removed.➪ Replace it.E-77: The unit is malfunctioning for some reason.➪ Press the reset button on the unit. If the"E-77" code does not disappear, consultyour nearest service center.Mecha Error: Something is wrong with the discmagazine. Or the unit is malfunctioning forsome reason.➪ Check the disc magazine. And thenpress the reset button on the unit. If the"Mecha Error" code does not disappear,consult your nearest service center.Hold Error: The protective circuit in the unit activateswhen the temperature inside theautomatic disc changer exceeds 60°C(140°F), stopping all operation.➪ Cool down the unit by openingthe windows or turning on the airconditioner. As the temperature fallsbelow 60°C (140°F), the disc will startplaying again.NO NAME: • Attempted to display DNPS during the CDplay having no disc names preset.• Attempted to display the ID3 tag whilethe MP3/WMA having no ID3 tag is beingplayed.Waiting: Radio text data is being received.Load: Discs are being exchanged in the Discchanger.Reading: The unit is reading the data on the disc.NO ACCESS: After setting it in the Disc Changer, DNPPwas done without having it been played atleast 1 time.IN (Blink): The CD player section is not operatingproperly.➪ Reinsert the CD. If the CD cannot beejected or the display continues to flasheven when the CD has been properlyreinserted, please switch off the powerand consult your nearest service center.Unsupported:A MP3/WMA is played with a format thatthis unit can't support.➪ ----Protected: A copy-protected file is played.➪ ----English | 35

/ 36

Related manuals for Kenwood KDC-W6027