Kenwood KDC-W6031 Instruction Manual

Also see for KDC-W6031: Service manual Service manual

Kenwood KDC-W6031 Instruction Manual Manual pdf 11 page image

English | 11Audio SetupSetting the Sound system, such as Cross overNetwork.1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Setup modePress the [VOL] knob for at least 1 second.3 Select the Audio Setup item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Setup the Audio itemTurn the [VOL] knob.Adjustment Item Display RangeFront High Pass Filter "HPF" Through/40/60/80/100/120/150/180/220 HzRear High Pass Filter "HPR" Through/40/60/80/100/120/150/180/220 HzLow Pass Filter*1 "LPF" 50/60/80/100/120/ThroughHzSubwoofer Phase*1 "PHAS" Normal (0°)/ Reverse (180°)Volume offset "V-OFF" –8 — ±0Loudness "LOUD" OFF/ON• Volume offset: Each source’s volume can be set as adifference from the basic volume.• Loudness: Compensating for low and high tonesduring low volume.When it's ON, "LOUD" indicator is ON.• *1 You can control this item when (page 26) is set to "SWPRE SW".• *1 You can control this item when Output> (page 11) is set to "SW ON".5 Exit Audio Setup modePress [VOL] knob for at least 1 second.Speaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob.3 Select the Speaker typeTurn the [VOL] knob.Each time the knob is turned, the settingswitches as shown below.Speaker type DisplayOFF "SP OFF"For 5 & 4 in. speaker "SP 5/4"For 6 & 6x9 in. speaker "SP 6x9/6"For the OEM speaker "SP OEM"4 Exit Speaker Setting modePress the [VOL] knob.Subwoofer OutputTurning the Subwoofer output ON or OFF.Hold down on [AM] of the Control knob for atleast 1 second.Each time the button is pressed, Subwooferoutput switches ON and OFF.When it’s ON, "SW ON" is displayed.• You can control this function when preout> (page 26) is set to "SWPRE SW".