Kenwood KDC-W6031 Instruction Manual

Also see for KDC-W6031: Service manual Service manual

Kenwood KDC-W6031 Instruction Manual Manual pdf 33 page image

English | 33Connecting Wires to Terminals£ÓÎ{xÈÇn£ÓÎ{xÈÇn1/*° " / /° " /8/° " /Rear right output (Red)/Sub Woofer right output (Red) Rear left output (White)/Sub Woofer left output (White)Front left output (White)Front right output (Red)Battery wire (Yellow)Ignition wire (Red)FM/AM antennainputAntenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)Wiring harness(Accessory1)If no connections are made, donot let the wire come out fromthe tab.Power control/ Motorantenna control wire(Blue/White)TEL mute wire (Brown)Connect either to the powercontrol terminal when using theoptional power amplifier, or tothe antenna control terminal inthe vehicle.Connect to the terminal that is groundedwhen either the telephone rings or duringconversation.A-–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)To External Display/Steering remoteSee next pageTo connect the KENWOODnavigation system, consultyour navigation manual.External amplifier control wire(Pink/Black) To "EXT.AMP.CONT." terminal of theamplifier having the external ampcontrol function.KENWOOD disc changer inputTo connect the Disc changer,consult your Disc changermanual.