English|31Audio Preset CallRecalling the sound setup registered by Preset Memory> (page 30).1Select the sourcePress the [SRC] button.2Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3Select Audio Preset modePush the Control knob to [FM] or [AM].Select the "A-PRESET" display.4Enter Audio Preset modePress the Control knob for at least 1 second.5Select the Audio Preset CallPush the Contol knob to [FM] or [AM].Select the "CALL" display.6Call up the Audio PresetPress the Control knob for at least 2 seconds.The "CALL" display blinks 1 time.7Exit Menu modePress the [MENU] button.• The User memory of (page 10) ischanged to the value which was recalled.• The source tone memory item of (page 10) is changed to the value which was recalledby the selected source.In Standby modeDemonstration mode SettingSets the demonstration mode.1Select the Demonstration modePush the Control knob to [FM] or [AM].Select the "DEMO" display.2Set the Demonstration modePress the Control knob for at least 2 seconds.Each time the knob is pressed at least 2 seconds,the Demonstration mode switches as shownbelow.DisplaySetting"DEMO ON"The Demonstration mode function is ON."DEMO OFF"Exit Demonstration mode (Normal mode).
