Kenwood KDC-W6537U Instruction Manual

Also see for KDC-W6537U: Firmware update guide Service manual

Kenwood KDC-W6537U Instruction Manual Manual pdf 28 page image

28 | EnglishMenu system Other than Standby modeAudio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1 Setup Sound ControlRefer to the following operations to setup theSound Control.-

2 Enter Menu modePress the [MENU] button."MENU" is displayed.3 Select Audio Preset modePush the Control knob towards up or down.Select the "A-PRESET" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset MemoryPush the Control knob towards up or down.Select the "MEMORY" display.6 Put the Audio Preset in the memoryPress the Control knob for at least 2 seconds.The "MEMORY" display blinks 1 time.7 Exit Audio Preset modePress the [MENU] button.⁄• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Loudness, Volume offsetIn Standby modeBuilt-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"AUX OFF" When selecting the source there’s no Auxiliary Input."AUX ON" When selecting the source there’s Auxiliary Input.In Standby modePower OFF TimerSetting the timer to turn this unit’s power OFFautomatically when Standby mode continues.Using this setting can save the vehicle’s batterypower.Display Setting"OFF – – –" Power OFF Timer function is OFF."OFF 20M"(Original setting)Turns the power OFF after 20 minutes."OFF 40M" Turns the power OFF after 40 minutes."OFF 60M" Turns the power OFF after 60 minutes.In Standby modeCD Read SettingWhen there is a problem with playing a CD withspecial format, this setting plays the CD by force.Display Setting"CD READ1" Play CD and Audio file."CD READ2" Play CD by force.⁄• Some music CDs may not play even in the "CD READ2"mode.