Kenwood KDC-X302 Instruction Manual

Kenwood KDC-X302 Instruction Manual Manual pdf 31 page image

ENGLISH 27AUDIO SETTINGS• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select thespeaker you want to adjust:FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER:You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].• [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] isselected for [REAR] of [SPEAKER SIZE].Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]If you specify the distance from the center of thecurrently set listening position to every speaker,the delay time will be automatically computedand set.1 Determine the center of the currently setlistening position as the reference point.2 Measure the distances from the referencepoint to the speakers.3 Calculate the differences between thedistance of the furthest speaker (rearspeaker) and other speakers.4 Set the [DISTANCE] calculated in step 3 forindividual speakers.5 Adjust [GAIN] for individual speakers.Example: When [FRONT ALL] is selected as thelistening positionDISPLAY SETTINGSSet the dimmerPress and hold DISP (DIMMER) to turn on or off the dimmer.• If you have set [DIMMER TIME] ( 28), it will be canceled once you pressand hold this button.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item ( 28), then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Zone identification for color and brightness settingsZone identification for brightness settings