Kenwood KDC-X599 Instruction Manual

Also see for KDC-BT562U: Instruction manual

Kenwood KDC-X599 Instruction Manual Manual pdf 15 page image

ENGLISH 13BLUETOOTH®BLUETOOTH — ConnectionSupported Bluetooth profiles– Hands-Free Profile (HFP)– Serial Port Profile (SPP)– Phonebook Access Profile (PBAP)– Advanced Audio Distribution Profile (A2DP)– Audio/Video Remote Control Profile (AVRCP)Supported Bluetooth codecs– Sub Band Codec (SBC)– Advanced Audio Coding (AAC)– aptX Codec (aptX)Connect the microphoneAdjust themicrophone angleSecure using cord clamps (notsupplied) if necessary.MIC (Microphone input terminal) Microphone(supplied)Rear panelPair a Bluetooth deviceWhen connecting a Bluetooth device to the unit for the first time, perform pairing between theunit and the device.1 Press to turn on the unit.2 Search and select this unit model name (KDC-X5**/ KDC-BT5**U/ KMR-D5**BT) on theBluetooth device.“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on thedisplay.• For some Bluetooth devices, you may need to enter the Personal Identification Number(PIN) code immediately after searching.• Refer also to the manual supplied with your Bluetooth device.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed and “ ” will light up when the Bluetoothconnection is established.• Up to five devices can be registered (paired) in total.• Only one Bluetooth device can be connected at any time.• This unit supports Secure Simple Pairing (SSP).• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect thedevice to the unit manually. Refer to the instruction manual of the Bluetooth device for moreinformation.• Once the pairing is completed, the Bluetooth device will remain registered in the unit even ifyou reset the unit. To delete the paired device, 17, [DEVICE DELETE].• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairingrequest (via Bluetooth) is automatically activated. Press the volume knob to pair once you haveconfirmed the device name.Automatic pairing request is activated only if:– Bluetooth function of the connected devcie is turned on.– [AUTO PAIRING] is set to [ON]. ( 17)– KENWOOD MUSIC PLAY application is installed on the Android device.