Kenwood KDC-X599 Instruction Manual

Also see for KDC-BT562U: Instruction manual

Kenwood KDC-X599 Instruction Manual Manual pdf 22 page image

20DISPLAY SETTINGS1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [DISPLAY], then press the knob.3 Turn the volume knob to make a selection (see the following table),then press the knob.4 Repeat step 3 until the desired item is selected/activated or followthe instructions stated on the selected item.5 Press and hold to exit.To return to the previous setting item, press .Default: XXCOLOR SELECT VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects your preferredkey and display illumination color.You can create your own color (when [CUSTOM R/G/B] or preset colors* isselected). The color you have created can be stored in [CUSTOM R/G/B].1 Press and hold the volume knob to enter the detailed color adjustment.2 Press S / T to select the color (R/ G/ B) to adjust.3 Turn the volume knob to adjust the level (0 — 9), then press the knob.DIMMER ON: Dims the display and button illumination. ; OFF: Cancels.BRIGHTNESS 0 — 31: Selects your preferred brightness level for display and buttonillumination.TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display informationautomatically, or scroll only once. ; OFF: Cancels.* Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/ORANGEREDAUDIO SETTINGSLPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/160 Hz are sent to the subwoofer.SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwooferoutput to be in line with the speaker output for optimumperformance. (Selectable only if a setting other than [THROUGH] isselected for [LPF SUBWOOFER].)HPF THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/150 Hz are sent to the speakers.FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets thevolume adjustment level of each source. (Before adjustment, selectthe source you want to adjust.)SOUND RECNSTR(Sound reconstruction)ON: Creates realistic sound by compensating the high-frequencycomponents and restoring the rise-time of the waveform that arelost in audio data compression. ; OFF: Cancels.[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if[SUBWOOFER SET] is set to [ON].