Kenwood KDC-X599 Instruction Manual

Also see for KDC-BT562U: Instruction manual

Kenwood KDC-X599 Instruction Manual Manual pdf 29 page image

ENGLISH 27Part list for installation(A) FaceplateWiring connectionFuse (10 A)Rear/ front/ subwoofer outputAntenna terminalCar fuse boxCar fuse boxBatteryIgnition switchBlue/White(Power control wire/Antenna control wire)Blue/White(Power control wire)Light blue/yellow(Steering remotecontrol wire)Red(Ignition wire)Yellow(Battery wire)Black (Ground wire)To the metallic body or chassis ofthe carTo the power control terminal whenusing the optional power amplifier orto the antenna control terminal in thevehicleTo the power control terminal whenusing the optional power amplifier.Brown(Mute control wire)Blue(Antenna control wire)WhiteGrayGreenPurpleWhite/BlackGray/BlackGreen/BlackPurple/BlackTo connect the Kenwood navigation system,refer your navigations manualTo front speaker (left)To rear speaker (left)To front speaker (right)To rear speaker (right)(Not used)To Kenwood Wired Marine Remote Controlunit (optional accessory)For the latest information on marineaccessories please go to:http://www.kenwoodusa.com/Car_Entertainment/Marine/If no connections are made, do not let the wire come out from the tab.To the steering wheel remote controladapter(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyMIC (Microphone input terminal) ( 13)To the optional SiriusXM Vehicle Tuner(commercially available) ( 10)Light blue/yellow(Marine remote controlwire)Only for :Only for / :When connecting to an externalamplifier, connect its groundwire to the car’s chassis to avoiddamaging the unit.