14 | EnglishGeneral featuresTheft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the Faceplate1 Press the Release button.Drop open the faceplate.2 Drawing the faceplate to left side pull it toforward and remove it.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts.• Keep the faceplate in its faceplate case whiledetached.• Do not expose the faceplate (and the faceplate case)to direct sunlight or excessive heat or humidity. Alsoavoid places with too much dust or the possibility ofwater splashing.Reattaching the Faceplate1 Align the shaft on the unit with thedepression on the faceplate.2 Push the faceplate in until it clicks.The faceplate is locked in place, allowing you touse the unit.Switching DisplayChanging the information displayed.1 Enter Switching Display modePress the Control knob for at least 1 second."DISP SEL" is displayed.2 Select the Display itemPush the Control knob towards [4] or[¢].In Tuner sourceInformation DisplayFrequency "FREQ"Clock "CLOCK"In CD & External disc sourceInformation DisplayDisc title "D-TITLE"*Track title "T-TITLE"*Track number & Play time "P-TIME"Clock "CLOCK"In Audio file sourceInformation DisplaySong title & Artist name "TITLE"*Album name & Artist name "ALBUM"*Folder name "FOLDER"File name "FILE"Track number & Play time "P-TIME"Clock "CLOCK"In Standby/ Auxiliary input sourceInformation DisplaySource name "SRC NAME"Clock "CLOCK"3 Exit Switching Display modePress the Control knob.• When LX-AMP is connected, the item setup by theDisplay mode of LX-AMP is displayed.• * If the contents of the information cannot bedisplayed, Play time is displayed.• Track number at Audio file displays the last 3 digitswhen it exceeds 1000 songs.• When you select the clock display, the display settingof each source will be changed to the clock display.