28 | EnglishMenu systemIn Standby modeManual Clock Adjustment1 Select Clock Adjustment modePush the Control knob towards [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or[¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.In Standby modeSelectable IlluminationSelecting the button illumination color as greenor red.Display Setting"KEY GRN" The illumination color is green."KEY RED" The illumination color is red.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This functionis effective when you are driving at night.Display Setting"DISP ON" Keeps the display on."DISP OFF" Turns off the display when you perform nooperation for 5 seconds.• When the display is off, pressing any key will turn onthe display.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Turning off the power• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically whenthe vehicle light switch is turned ON.Display Setting"DIM ON" The display dims."DIM OFF" The display doesn’t dim.