Kenwood KDC-X990 Instruction Manual

Contents

English | 277 Exit display control modeTurn the [VOL] knob to select "Return".Press the [VOL] knob.• When you selected the Display Type B display, selectan easy viewable font color.• The "Indicator" item of Display type C/D can be set;however, the actual display color does not change.• This function can be set for each display type.• When the SIRIUS tuner source in the 1-item 4-rowcmode of Display type C/D, the same color is set forboth the upper and lower rows.Display Type EG-Analyzer display SwitchingAlternates G-Analyzer display when the Displaytype is set to "Display Type E". (G: gravity)• Never watch the G-Analyzer Display screen when youare driving.Otherwise, a car accident may result.• Before alternating G-Analyzer display, you are requiredto setup (page 47) and Analyzer Calibration setup> (page 48).1 Show the Multi-function displayPress the [NEXT] button repeatedly until"Display" appears.Refer to (page9).2 Enter display control modeTurn the [VOL] knob to select "Display".Press the [VOL] knob.3 Select the display modeTurn the [VOL] knob to select "mode".Press the [VOL] knob.Select the "Display Type E" display.4 Enter G-Analyzer display select modeTurn the [VOL] knob to select "G-Menu".Press the [VOL] knob.5 Select the G-Analyzer displayPush the Control knob towards [4] or[¢].G-Analyzer displayG- Graphic displayG-Meter displayPointTimeG-Counter display• G-Graphic display:Displays the condition of G in horizontal direction (e.g;when turning the curve) by the graphic.• G-Meter display (Graphic part):Displays the maximum value of acceleration G, rightdirection G, and left direction G by the numericalvalue.G-Meter display (Text part):The maximum value of acceleration G, right directionG, and left direction G is displayed by the numericalvalue. The value of G is only the reference, so isdifferent from the actual value.• G-Counter display:Adds the point of the acceleration level. The point isdetermined after a lapse of 1 hr drive or at power off(ACC Off ), and then it will be displayed by the graph.Furthermore, the G-Counter displays the averageof the past data by the line. (The scale of graph isdetermined along with the largest point among thepast 10 data.)• The value of G-Meter display and G-Counter displaycan be reset by (page 47).6 Exit display control modeTurn the [VOL] knob to select "Return".Press the [VOL] knob.