Kenwood KDC-X994 Instruction Manual

Also see for KDC-BT945U: Service manual Instruction manual Quick start guide

Contents

Kenwood KDC-X994 Instruction Manual Manual pdf 32 page image

32 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745UDisplay SettingsCustomization of Spectrum AnalyzerDisplay ModeYou can customize the display of the Spectrumanalyzer display mode.1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Menu List modePress the [MENU] button.3 Enter the Display Setting mode and select theSpectrum analyzer display modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” > “DISP & ILLUMI” > “DisplaySelect” > “Type Select” > Spectrum analyzerdisplay mode.4 Select the setting item to adjustTurn the [VOL] knob and press it when thedesired item is displayed.Display Setting“Display Select”“Type Select” Selects the Spectrum analyzer display mode.“GraphicSelect”Changes the display of the Spectrum analyzerdisplay mode.“Text Select” Sets the text display.5 Make a settingPress the [4] or [¢] button.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.Function of KDC-X994Illumination Color SelectionSelecting the Illumination Color of the panel.1 Enter Menu List modePress the [MENU] button.2 Enter Illumination color selection modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” > “DISP & ILLUMI” > “ColorSelect”.3 Select the place where you want to set theIllumination ColorTurn the [VOL] knob and press it when thedesired item is displayed.Place DisplayDisplay and key “All”Display “Display”Key “Key”4 Select the Illumination ColorTurn the [VOL] knob and press it when thedesired item is displayed.Select the color from “Variable Scan”/ “Color1” —“Color 10”/ “User”.Creating “User” colorYou can create your original color during theselection from “Color1” — “Color10.”The color you created can be called when youselect “User”.1. Press the [VOL] knob for at least 1 second.Enter the detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust.(red, green, or blue)Press the [4] or [¢] button.To adjust color.(Range: 0 – 9)Turn the [VOL] knob.3. Press the [VOL] knob.Exit the detail color adjustment mode.5 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.