Kenwood KDC-X994 Instruction Manual

Also see for KDC-BT945U: Service manual Instruction manual Quick start guide

Contents

Kenwood KDC-X994 Instruction Manual Manual pdf 43 page image

English | 43Reference pointFRONTFRONTSUB-WREARREAR1.7 feet4.9 feet+0 feet+3.2 feet2.6 feet+2.3 feet5 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.5 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.Car Type Fine AdjustmentsAdjusting fine tuning of the speaker positioncompensation value specified at Selection> (page 42).Display Item Range“Front” Front speaker 0 – 14.44 feet“Rear” Rear speaker 0 – 14.44 feet“SW” Subwoofer 0 – 14.44 feet( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Car Type Adjustment modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Detailed Setup” > “Car Type Adjust”.4 Select the item you want to setOperation type OperationSelects the item. Turn the [VOL] knob.Adjust each item. Press the [4] or [¢] button.Set the value Press the [VOL] button.The settings of the delay time are automaticallyidentified and compensated by specifying thedistances of each speaker from the center of thevehicle interior.1 Set the front and rear positions and the heightof the reference point to the position of the earsof the person sitting in the front seat, and setthe right and left positions to the center of thevehicle interior.2 Measure the distances from the reference pointto the speakers.3 Calculate the distance difference in accordancewith the farthest speaker.