Kenwood KDV-5234 Instruction Manual

Also see for KDV-5234: Instruction manual

Contents

44 KDV-52344 Exit audio setupQ AMSETUPAUDVOLATTMENU SCANSTOPM/SRDM REP F.SEL M.RDMDISP/PTYSWAMETIFM SCRLSRC• If a volume offset is set for each source with "V-OFF", thevolume will be nearly the same for all sources when thesource is changed.• When "2ZON" is ON ("DVD"/"AUX"), you can only set "V-OFF" and "LOUD".• If the dual zone function is used, different sources can beoutput from the front speakers (source of this unit) andthe rear speakers (disc source of this unit or the soundinput to the built-in AUX).• For "LPF" and "PHAS", the feature "SWPRE" needs to beset to "SW" (subwoofer) in advance in the menu setup,and the subwoofer output to ON. For details on how toset up "SWPRE", refer to (page 50), and forsubwoofer output, refer to (page 45).• "PHAS" cannot be set up when "LPF" is set to "THRU".• "AVOUT" can be set when the feature "SWPRE" in setup> (page 50) is set to "AV".Speaker setupFine adjust the System Q value to the speakers.1 Set to STANDBY modeQ AMSETUPAUDVOLMENU SCANSTOPM/SRDM REP F.SEL M.RDMOFFDISP/PTYSWSRCSTANDBYSelect "STANDBY".2 Set to the speaker matching modeQ AMSETUPAUDVOLATTMENU SCANSTOPM/SRDM REP F.SEL M.RDMDISP/PTYSWAMETIFM SCRLSRCAudio setupSets up volume offset, dual zone function, etc.1 Start audio setupQ AMSETUPAUDVOLATTMENU SCANSTOPM/SRDM REP F.SEL M.RDMDISP/PTYSWAMETIFM SCRLSRC2 Select features to setQ AMSETUPAUDVOLATTMENU SCANSTOPM/SRDM REP F.SEL M.RDMDISP/PTYSWAMETIFM SCRLSRCEach time the knob is rotated, the typechanges in the following order.Feature Setting rangeHPF Specifies the front high-pass filter cutofffrequency.HPR Specifies the rear high-pass filter cutofffrequency.LPF Specifies the low-pass filter cutoff frequency.PHAS Specifies the subwoofer phase.V-OFF Adjusts the volume difference between sources.LOUD Corrects treble and bass when the volume is low.AVOUT Specifies the output level of the AV OUT terminal.2ZON Turns the dual zone function ON/OFF.3 Set up each featureQ AMSETUPAUDVOLATTMENU SCANSTOPM/SRDM REP F.SEL M.RDMDISP/PTYSWAMETIFM SCRLSRCThe setting range of each item is as follows:Features Setting rangeHPF/HPR THRU (Filter Off)/40/60/80/100/120/150/180/220 (Hz)LPF 50/60/80/100/120 (Hz)/THRU (Filter Off)PHAS REV (180˚)/NML (0˚)V-OFF -8 – 0LOUD OFF/ONAVOUT -15 – 02ZON OFF/DVD/AUXAudio Control