Kenwood KDV-5234 Instruction Manual

Also see for KDV-5234: Instruction manual

Contents

76 KDV-5234PRK SWVIDEO OUTConnectionsTelevision monitor, etc(optional accessory)Parking sensor wireDetection cable(Light Green)For the sake of safety,be sure to connect theparking sensor.Visual output(Yellow)To External Display/ Steering remote2WARNINGConnecting the ISO ConnectorThe pin arrangement for the ISO connectors depends onthe type of vehicle you drive. Make sure to make the properconnections to prevent damage to the unit.The default connection for the wiring harness is described in1 below. If the ISO connector pins are set as described in 2or 3, make the connection as illustrated.Please be sure to reconnect the cable as shown 2 below toinstall this unit to the Volkswagen vehicles etc.1 (Default setting) The A-7 pin (red) of thevehicle’s ISO connector is linked with theignition, and the A-4 pin (yellow) is connectedto the constant power supply.Unit VehicleA-7 Pin (Red)A-4 Pin (Yellow)Ignition cable (Red)Battery cable (Yellow)2 The A-7 pin (red) of the vehicle’s ISO connectoris connected to the constant power supply, andthe A-4 pin (yellow) is linked to the ignition.Unit VehicleA-7 Pin (Red)A-4 Pin (Yellow)Ignition cable(Red)Battery cable(Yellow)3 The A-4 pin (yellow) of the vehicle’s ISOconnector is not connected to anything, whilethe A-7 pin (red) is connected to the constantpower supply (or both the A-7 (red) and A-4(yellow) pins are connected to the constantpower supply).Unit VehicleA-7 Pin (Red)A-4 Pin (Yellow)Ignition cable (Red)Battery cable (Yellow)• When the connection is made as in 3 above, the unit’spower will not be linked to the ignition key. For that reason,always make sure to turn off the unit’s power when theignition is turned off.To link the unit’s power to the ignition, connect the ignitioncable (ACC...red) to a power source that can be turned onand off with the ignition key.Connector Function GuidePin Numbers forISO ConnectorsCable Colour FunctionsExternal PowerConnectorA-4 Yellow BatteryA-5 Blue/White Power ControlA-6 Orange/White DimmerA-7 Red Ignition (ACC)A-8 Black Earth (Ground)ConnectionSpeaker ConnectorB-1 Purple Rear Right (+)B-2 Purple/Black Rear Right (–)B-3 Gray Front Right (+)B-4 Gray/Black Front Right (–)B-5 White Front Left (+)B-6 White/Black Front Left (–)B-7 Green Rear Left (+)B-8 Green/Black Rear Left (–)• Connect to the vehicle's parking brake detectionswitch harness using the supplied relay connector.Parking sensor wireJunction cable(Light Green)(Accessory7)