Kenwood KMD-673R Instruction Manual

Also see for KMD-673R: Service manual

English— 28 —Connecting Cables to Terminals1234567812345678TEL MUTEP.CONTANT.CONTRear rightoutput (Red)Rear leftoutput (White)Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left ( +)Rear Left ( –)Battery cable (Yellow)Ignition cable (Red)FM/AM antennainputAntenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory3)To connect the KENWOODnavigation system, consultyour navigation manual.NOTEWiring harness(Accessory1)If no connections are made,do not let the cable comeout from the tab.Power control/ Motorantenna control cable(Blue/White)TEL mute cable (Brown)Connect either to the powercontrol terminal when usingthe optional power amplifier,or to the antenna controlterminal in the vehicle.Connect to the terminal that isgrounded when either thetelephone rings or duringconversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)KENWOOD disc changer control inputTo connect the Disc changer,consult your Disc changer manual.NOTE