Adjust various parameters of sound quality.Press the AUD button to enter the control mode.Selecting modePress either the FM or AM button.Each time the button is pressed, the adjustment mode willchange.Please refer to the following for the contents of theadjustment modes.Source tone memoryEach source (CD, MD, FM, AM and disc changer) has its ownmemory in which to store the bass, middle, and treble tonesettings.The settings made for a particular source are then recalledautomatically whenever you use that source (e.g., FM mode usesthe tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.3NOTE21Audio Control SettingThis function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up, when the loudness function ison.Turning Loudness On/Off:Hold down the LOUD button for one second or more to switchthe loudness on and off.LoudnessSwitching Modes:Each time you press the SRC button, the mode switches asfollows:Selecting the standby mode:Press the SRC button repeatedly to select to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is turned on.The standby mode turns all functions off although leaving theunit’s power on. Use this mode when you want to have thedisplay illuminated but do not want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" (or AUX-name display) will showin the display. When the CA-C1AX is being used, the AUXMode will replace the External Disc Control Mode.• If you have selected Standby mode, the timer function thatturns the power off automatically will be activated.To find out how to set the time on the timer, and how to cancelNOTEtTuner modetMD modetExternal disc control mode 1tExternal disc control mode 2/AUX modetStandby modeSwitching ModesGeneral features— 6 —English the timer function, refer to the section on the Power OFF Timerfunction under Menu settings (page 26).Presetting AUX-name (Except the CA-C1AX)In the AUX mode, press the NAME.S button for two seconds ormore. "NAME SET" is display and AUX-name mode is entered.Input the characters, referring to the section on "Presetting DiscNames (DNPS)" (page 20).NOTE