Kenwood KMM-BT504DAB Instruction Manual

ENGLISH 17PHONE BOOK (Applicable only if the phone supports PBAP.)1 Turn the volume knob quickly to enter alphabet search mode (if thephonebook contains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press/ .• To select the desired first letter, turn the volume knob or pressS / T, then press the knob.Select “1” to search with numbers and select “*” to search withsymbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knobto call.• The phonebook of the connected phone is automatically transferred tothe unit when pairing.• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL.• This unit can display only non-accent letters. (Accent letters such as “Ú”is shown as “U”.)NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character( , #, +).2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the phone number.3 Press the volume knob to call.VOICE Speak the name of the contact you want to call or the voice commandto control the phone functions. ( 18, Make a call using voicerecognition)BATT LOW/MID/FULL*: Shows the strength of the battery.NO SIGNAL/LOW/MID/MAX*: Shows the strength of the current received signal.* Functionality depends on the type of the phone used.Make a callYou can make a call from the call history, phonebook, or dialing thenumber. Call by voice is also possible if your mobile phone has thefeature.1 Press to enter Bluetooth mode.“(First device name)” appears.• If two Bluetooth phones are connected, press again to switch toanother phone.“(Second device name)” appears.2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .CALL HISTORY (Applicable only if the phone supports PBAP.)1 Press the volume knob to select a name or a phone number.• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower partof the display to indicate the previous call status.• Press DISP to change the display category (NUMBER or NAME).• “NO DATA” appears if there is no recorded call history.2 Press the volume knob to call.BLUETOOTH®