Kenwood KMM-BT504DAB Instruction Manual

32 ENGLISHREMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEFuse (10 A)Antenna terminalBlue/White*2(Power control wire/Antenna control wire)Light blue/yellow(Steering remotecontrol wire)To the power control terminal whenusing the optional power amplifier orto the antenna control terminal in thevehicleBrown(Mute control wire)To connect the Kenwood navigationsystem, refer your navigation manualIf no connections are made, do not let the wire come out from the tab.To the steering wheel remote controladapterWhen connecting to an external amplifier,connect its ground wire to the car’s chassis toavoid damaging the unit.INSTALLATION/CONNECTIONPin Color and function (for ISO connectors)A4 Yellow : BatteryA5 Blue/White*1 : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)For 3-way crossover: Tweeter (right)B2 Purple/black [B3 Gray ] : Front speaker (right)For 3-way crossover: Mid range speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)For 3-way crossover: Mid range speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)For 3-way crossover: Tweeter (left)B8 Green/black [If your car does not have an ISO terminal:We recommend installing the unit with a commercially available customwiring harness specific for your car and leave this job to professionals foryour safety. Consult your car audio dealer.Connecting the ISO connectors on some VW/Audi or Opel(Vauxhall) automobilesYou may need to modify the wiring of the supplied wiring harness asillustrated below.UnitVehicleA7 (Red) Ignition wire (Red)A4 (Yellow)Default wiringBattery wire (Yellow)Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)ISO connectorsWiring connectionNOTE: Total output for Blue/White wire (*1) + (*2)is 12 V 350 mAFront/Rear/Subwoofer outputFor 3-way crossover:Mid Range/Woofer outputMicrophone input jack ( 14)DAB antenna jack ( 6)