Kenwood KMM-BT506DAB Quick Start Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Instruction manual

64 Rub the film antenna gently onto thewindscreen in the direction of the arrowshown to allow it to stick firmly.5 Remove the separator (tag 2) of filmantenna (F) vertically.Separator (tag 2)6 Set the position of the protrusion of theamplifier unit (G) with the K mark on thefilm antenna (F) and paste.Do not touch the lead terminal or the pastingsurface (adhesive side) of the amplifier unit(G).• When installing the antenna on the rightsideEarth sheetSet the position ofthe protrusion withK markLead contact of the amplifier unit(metal part)Lead terminal of thefilm antenna (F)• When installing the antenna on the left sideEarth sheet7 Remove the film covering the earth sheetand paste the earth sheet on the metal partof the vehicle.Provide sufficient leeway for the earth sheetso that it does not interfere with the interiorparts (front pillar cover). Also take care thatthe interior parts do not interfere with theamplifier unit (G).(G)WindscreenEarth sheetFront pillar cover8 Wire the antenna cables.Use cable clamper (H) to secure the antennato the pillar at several positions.9 Attach the front pillar cover back to itsoriginal position.Be sure not to damage the earth sheet andamplifier unit (G) when covering.10 Connect the amplifier unit (G) to the DABantenna jack on the rear of the unit.Note:Make sure [DAB ANT POWER] is set to [ON] on the[FUNCTION] menu in standby mode.[ON] is selected initially.