Kenwood KMM-BT506DAB Quick Start Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Instruction manual

126 Repeat step 4 and step 5 to set color for other zones.7 Press and hold to exit.Other InformationFor playback operations of AUX, Spotify, and AMAZON ALEXA sources,refer to the INSTRUCTION MANUAL on the following website:Note for specificationsBluetooth Frequency Range:2.402 GHz — 2.480 GHzBluetooth RF Output Power (E.I.R.P.):+4 dBm (MAX), Power Class 2Speaker Impedance:4 Ω — 8 ΩOperating Voltage:12 V DC car batteryBluetooth®• Depending on the Bluetooth version, operating system and thefirmware version of your mobile phone, Bluetooth features may notwork with this unit.• Be sure to turn on the Bluetooth function of the device to make thefollowing operations.• Signal conditions vary depending on the surroundings.Connect the microphoneConnect the supplied microphone to the microphone input jack on the rearpanel.Adjust themicrophoneangleSecure using cordclamps (not supplied)if necessary.Pair and connect a Bluetooth device for the first time1 Press B SRC to turn on the unit.2 Search and select the name of your receiver (“KMM-BT506DAB”/“KMR-M506DAB”) on the Bluetooth device.“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUMEKNOB” appears on the display.• For some Bluetooth devices, you may need to enter the PersonalIdentification Number (PIN) code immediately after searching.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed.