Kenwood KRC-259R Instruction Manual

Also see for KRC-11RA: Instruction manual

— 26 —EnglishInst allat ionRemoving the hard rubber frame■When the low er level is removed, remove the upper tw o loca-tions.2The frame can be removed from the top side in the same man-ner.N OTECatchLockEngage the catch pins on the removal tool and remove the tw olocks on the low er level.Low er the frame and pull it forw ard as show n in the figure.1Accessory2Removal toolAccessory3Removing the Unit■Low er the removal tooltow ard the bottom, and pullout the unit halfw ay w hilstpressing tow ards theinside.4Pull the unit all the w ay outw ith your hands, being care-ful not to drop it.5Be careful to avoid injury from the catch pins on the removal tool.2CA U TIONCatch facing upRefer to the section “ Removing the hard rubber frame” andthen remove the hard rubber frame.Remove the Hex-head screw w ith integral w asher (M 4×8) onthe back panel.Insert the tw o removal tools deeply into the slots on each side,as show n.321Downloaded from: http://www.usersmanualguide.com/