Kenwood KRC-278RA Instruction Manual

Also see for KRC-178RA: Service manual

1234567812345678TEL MUTEP.CONTANT.CONT— 25 —Connecting Cables to TerminalsRear right output (Red)Rear left output (White)Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left (+)Rear Left (–)KENWOOD disc changer control inputBattery cable (Yellow)Ignition cable (Red)FM/AM antenna inputAntenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)To connect the KENWOODnavigation system, consultyour navigation manual.NOTEWiring harness(Accessory1)If no connections aremade, do not let the cablecome out from the tab.Power control/ Motorantenna control cable(Blue/White)TEL mute cable (Brown)Connect either to the powercontrol terminal when usingthe optional power amplifier,or to the antenna controlterminal in the vehicle.Connect to the terminal that isgrounded when either thetelephone rings or duringconversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)If no connections are made,do not cut the tube off fromthe edge of the cable.(KRC-278RA/278RG//23RA/23RG only)To connect the Discchanger, consult yourDisc changer manual.NOTE