Kenwood KRC-508S Instruction Manual

Also see for KRC-508S: Service manual

— 29 —Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (for example, the sound may skip).NOTEAccessory2Metal mountingstrapSelf-tappingscrew(commerciallyavailable)Firewall or metal supportAccessory6InstallationInstallation6 mmMAX.M5mm M5mm6 mmMAX.Installing in Japanese-Made CarsT: Toyota carsN: Nissan carsTNNT T/NAccessory4...for Nissan carAccessory5 ...for Toyota car• During installation, do not use any screws except for thoseprovided. The use of different screws might result in damage tothe main unit.• Damage may occur if a screwdriver or similar tool is used withexcessive force during the installations.2CAUTIONRefer to the section “Removing the hard rubber frame (P. 30)”and then remove the hard rubber frame.Mount the J-Car trim plate with the thick part at the bottom.Align the holes in the unit (two locations on each side) with thevehicle mounting bracket and secure the unit with theaccessory screws.3214 5Bend the tabs of themounting sleeve witha screwdriver orsimilar utensil andattach it in place.Accessory8J-Car Trim Plate(place thick part onbottom)