Kenwood KRC-508S Instruction Manual

Also see for KRC-508S: Service manual

Adjust various parameters of sound quality.Press the AUD button to enter the control mode.Selecting modePress either the FM or AM button.Each time the button is pressed, the adjustment mode willchange.Please refer to the following for the contents of the adjustmentmodes.Source tone memoryEach source ( tape, FM, AM and disc changer ) has its ownmemory in which to store the bass and treble tone settings.The settings made for a particular source are recalledautomatically whenever you use that source ( for example, FMmode uses the tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.Please refer to the following for the adjusting values.Press the AUD button to end the control mode.43NOTE21Audio Control SettingThis function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up when the loudness function is on.Turning Loudness On/Off:Press the LOUD button for at least one second to switch theloudness on and off.LoudnessGeneral features— 6 —EnglishSwitching Modes:Each time you press the SRC (source) button, the modeswitches as follows:Selecting standby mode:Press the SRC button repeatedly and switch to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is activated.The standby mode turns all functions off while leaving thepower to the unit on. Use this mode when you want to havethe display illuminated but don't want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• The AUX mode is available only when the changer / AUXswitching adapter (KCA-S210A or CA-C1AX) or CD changer(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) isconnected to this unit.During the AUX mode, "AUX" / AUX-name will show in thedisplay. When the CA-C1AX is being used, the AUX Mode willreplace the External Disc Control Mode.Presetting AUX-nameIn the AUX mode, press the NAME.S button for at least twoseconds. "NAME SET" is display and AUX-name mode is entered.Input the characters, referring to the section on "Presetting DiscNames (DNPS)" (page 20).NOTENOTETuner modeTape modeExternal disc control mode 1External disc control mode 2/AUX modeStandby modeSwitching Modes