Kenwood KRC-689 Instruction Manual

Also see for KRC-689: Service manual

You can automatically store all the receivable frequencies inthe band currently being listened to, and then recall them withthe touch of a button later. This function is especially usefulwhen you are travelling and do not know what stations areavailable. Up to six frequencies can be stored this way.Select the band for auto memory entry.Press the AME button for at least two seconds to start automemory entry.The numbers of the preset station buttons are shown in order.When all the stations in a certain band are stored in the presetmemory, the auto memory entry stops. The tuner then playsthe last station received.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.21Auto Memory EntryStore the frequency of a station. You can then recall thatstation with a single touch of a button.Select the band/station that you want to have stored.Press the button (#1-6) that you want to use for the station, forat least two seconds.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store six stations in each of the FM1, FM2, FM3, andAM bands.NOTE21Station Preset Memoryreceived.You can choose from three tuning modes: auto seek, presetstation seek, and manual. The AUTO 1 indicator lights upwhen auto seek tuning is selected, and the AUTO 2 indicatorlights when preset station seek tuning is selected.Selecting Tuning Mode:Press the AUTO button.Each time you press the AUTO button, the mode switches asfollows.Tuning:Press the SRC (source) button repeatedly to select the tunermode. "TUNER" is displayed when the tuner mode has beenselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3 (which are used for groupsof preset stations).Press the AM button to select the AM band.• Auto Seek TuningPress the ¢ button to seek higher frequencies.Press the 4 button to seek lower frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.The ST indicator lights up when stereo broadcasts are beingNOTE321▼Auto 1 (Auto Seek Tuning)▼Auto 2 (Preset Station Seek Tuning)▼Manual (Manual Tuning)TuningFunction of the KRC-789/KRC-689Tuner features— 16 —English