Kenwood KRC-689 Instruction Manual

Also see for KRC-689: Service manual

• 4/¢ (TUNE) buttonsPress the 4 button to make decreasing seeks (using thepreset tuning mode).Press the ¢ button to make increasing seeks (using the presettuning mode).Use to move the cursor left or right during station name input.• AM/FM buttonsPress the AM button to select the AM band.Press the FM button to select and switch between FM1, FM2,and FM3 bands.During station name input, selects digits and symbols.• OK buttonDuring station name input, stores the already input data inmemory and ends the input mode.During Station name preset play mode, selects station.Pressing the OK button during the tuner mode results thefrequency part of the display blinking. In such cases, press thebutton again. It returns to the original display.• 38 buttonEnters and cancels the Program Type Selection (PTY) mode.Selects the type of characters at the time of entering the stationname.NOTETuner featuresEach time you press the SRC button, the mode switches asfollows:• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" (or AUX-name display) will showin the display.When the CA-C1AX is being used, the AUX Mode will replacethe External Disc Control Mode.• ATT buttonTurns down the volume quickly. To return the volume to itsoriginal level, press the button again. Turning the volume up, orturning it all the way down deactivates the attenuator function.NOTE▼Tuner mode▼Tape mode▼External disc control mode 1▼External disc control mode 2 / AUX mode▼Standby mode— 33 —