This adjustment permits easy viewing of the display.Display and setting:"Contrast 0" – "Contrast 10"The initial setting value is "5".NOTEContrast AdjustmentThis function allows you to turn off the lower part of thedisplay if there is too much information in the display.Display and setting:"Graphic ON" : The display will turn on by using the whole partof the display. (Default setting)"Graphic OFF" : The display will turn on by using only the upperpart of the display and the IN indicator.Switching Graphic DisplayYou can switch the color of the button illumination betweengreen and red.Display and setting:"Button Green": The color of the illumination is green."Button Red" : The color of the illumination is red.Selectable IlluminationAdjust the time manually.Display and setting:Select the display "Clock Adjust" during the selecting functionin the menu system.Press either the 4 or ¢ button for at least one second toenter the Manual time adjustment mode.The time display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the MENU button to end the Manual Time Adjustmentmode.Exiting the Manual Time Adjustment mode would start theclock counting.4321Manual Time AdjustmentThis function produces a beep sound that accompanies buttonoperation. It can be switched on or off.Display and setting:"Beep ON" : Beep setting is on. (Default setting)"Beep OFF" : Beep setting is off.The beep sound is not output from the preout jacks.NOTETouch Sensor Tone— 25 —