Kenwood KRC-PS978R Instruction Manual

This function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up, when the loudness function ison.Turning Loudness On/Off:Hold down the LOUD button for one second or more to switchthe loudness on and off.The loudness function does not affect non-fading pre-out.NOTELoudnessThis function allows you to turn down the volume quickly.Turning Attenuator On/Off:Press the ATT button to switch the attenuator on and off.When the attenuator is on, the ATT indicator blinks.When the attenuator is off, the volume returns to the originallevel.Turning the volume up, or turning it all the way down deactivatesthe attenuator function.NOTEAttenuatorIncreasing Volume:Press the u button to turn up the volume.Decreasing Volume:Press the d button to turn down the volume.VolumeEach time you press the SRC button, the mode switches asfollows:Selecting the standby mode:Press the SRC button repeatedly to select to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is turned on.The standby mode turns all functions off although leaving theunit’s power on. Use this mode when you want to have thedisplay illuminated but do not want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• The AUX mode is available only when the changer / AUXswitching adapter (KCA-S210A or CA-C1AX) or CD changer(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) isconnected to this unit.During the AUX mode, "AUX" / AUX-name will show in thedisplay. When the CA-C1AX is being used, the AUX Mode willreplace the External Disc Control Mode.Presetting AUX-nameIn the AUX mode, press the NAME.S button for two seconds ormore. "NAME SET" is display and AUX-name mode is entered.Input the characters, referring to the section on "Presetting DiscNames (DNPS)" (page28).NOTENOTEtTuner modetTape modetExternal disc control mode 1tExternal disc control mode 2/AUX modetStandby mode— 7 —