• You can give names to discs through the presetting discname function (page 32).Note that depending on the unit, display may not bepossible.• If you try to display the name of a disc that does not haveone, "NO NAME" is displayed instead.• When there is an attempt to display the title of a disc forwhich the disc title/track title has not been recorded, "NOTEXT" is displayed for CD and "NO TITLE/NO NAME" isdisplayed for MD.• If you attempt to display disc title/track title whenconnecting the CD changer not supported for CD textfeature, caution messages such as "NO TEXT" or "Reading"may be displayed.• Depending on the type of characters of the CD Text, somecharacters may not be displayable.• Please see the menu settings about selecting the display mode.For details refer to the Switching Display Mode page for themenu settings. (page 38)• The same items cannot be selected for both the upper part andthe lower part.NOTENOTEDisc name (DNPS)(only when being preset)Track TimeDisc Title (Units featuring CD text/MD only)Track Title (Units featuring CD text/MD only)This function switches the type of information on the upperpart display when the display mode is in vertical divisiondisplay.Each time you press the DISP button, the upper part displaychanges as follows:In Tuner mode:Displaying Frequencies:Hold down the DISP button for one second or more.The frequency for the RDS station will be displayed for fiveseconds instead of the station name.If the RDS station currently tuned to is transmitting no textwhilst the Radio Text Display mode is turned on, "NO TEXT"will appear in the display. Whilst awaiting reception, "Waiting"will be displayed.To prevent accidents, drivers should not look at the displaywhilst driving.In Tape mode:In External disc control mode:Play side + Tape counterPlay sidePlay side + Tape running2WARNINGNOTEProgramme Service name (only during RDS station reception) /Station frequencyRadio text (only during RDS station reception)Switching the Upper Part DisplayGeneral features— 10 —English