Kenwood KRC-PS979R Instruction Manual

Contents

When this system is set to on, the System Q factors (Basscentre frequency, Bass quality factor, Bass extend, Middlecentre frequency, Middle quality factor, and Treble centrefrequency) appear during the audio control mode.Display and setting:"System Q ON" : The System Q factors appear and can beadjusted. (Default setting)"System Q OFF" : The System Q factors do not appear.System QYou can set the interval during which the open control panelcannot reverse to be hidden. During the period you have set,the faceplate can be removed from the faceplate bracket.Display and setting:"Off Wait" : 0sec / 3sec (Default setting) / 5sec / 10sec / 15sec/ 20sec / 25sec (sec=seconds)Time setting for removing the faceplateYou can dim the display.The dimmer function is not available for units if the dimmer cableis not connected.Display and setting:"Dimmer ON" : The dimmer setting is on. (Default setting)"Dimmer OFF" : The dimmer setting is off.NOTEDimmerYou can change the font used on the display.Display and setting:Select the display "Font Select" during the selecting function inthe menu system.Pressing the 4 or ¢ button switches the font on thedisplay.21Font SelectThis function permits switching of the spectrum analyzerdisplay.Display and setting:Select the display "Icon/Speana Select" during the selectingfunction in the menu system.Pressing the 4 or ¢ button switches the Icon/Spectrumanalyzer.21Icon/Spectrum analyzer SelectYou can select the display mode of this unit.Display and setting:"Display Type A" : Divide the display into the upper and lowerparts to separately provide differentinformation. (Vertical division display) (page11) (Default setting)"Display Type B" : The display will turn on by using only theupper part of the display and clock."Display Type C" : Use the entire display to provide a singletype of information. (Full screen display)(page 9)Switching Display ModeMenu settings— 38 —English