You can set the defaults for additional functions in the menumode. Make a setting for each function, referring to thefollowing operations.Enter the menu modeHold down the MENU button for one second or more."MENU" is displayed when the menu mode is entered.The function that you can adjust is indicated with the currentsettings displayed.Selecting function to setPress the FM button to search through the functions until yousee the one you want to adjust in the display.Press the AM button to search through the functionsbackward.Function items change in the order of features that follow inthe menu system.Example: If you want to switch the setting of the touch sensortone function from on to off, first search through thefunctions until you see "Beep ON" in the display.Changing setting for currently displayed functionPress either the 4 or ¢ button.The setting will change for each function.Example: The setting of the touch sensor tone will switch fromon to off, and "Beep OFF" is displayed.Ending the menu modePress the MENU button.Make sure to end the menu mode when finished.If you fail to end the menu mode, several functions may notoperate properly, including the Traffic Information function, theNews Bulletin function with PTY news timeout setting, and theAlarm function.NOTE4321Menu SystemMenu settings— 34 —EnglishMENULOUDPROG/PTYNFDABAUDEXOFFVOL ADJNAMEDISPANG#1 ~ 6DISP MENU AMFMSRCNEWS indicatorRDS indicatorMenu displayDescription about this indicator for these features can bedisplayed by setting the Lower Part Display (page 11) to"... + Function indicator".