Kenwood KRF-V4550D Instruction Manual

Also see for KRF-V4550D: Service manual

21OperationsListening to radio broadcasts123 Each press switches the tuning method as follows:4Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob (press the key) to select thedesired station.Each press switches the bandas follows:1 AUTO lit (auto tuning)2 AUTO not lit (manual tuning)Frequencydisplay"TUNED" is displayedwhen a station is received• Normally, set to "AUTO" (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)"AM" or "FM" indicatorUse the INPUT SELECTOR or TUNER key to select thetuner.Use the BAND key to select the desired broadcast band.Use the AUTO key to select the desired tuning method.Use the MULTI CONTROL to select the station.1 FM2 AMLights when a broadcast isbeing received in stereo.AMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUNDFMMHz STEREOAUTOAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUNDFMMHz STEREOAUTOAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDMEMOFMMHz STEREOAUTOTUNEDST.RDS is a system that transmits useful information (in the form of digitaldata) for FM broadcasts along with the broadcast signal. Tuners andreceivers designed for RDS reception can extract the information fromthe broadcast signal for use with various functions, such as automaticdisplay of the station name.RDS functions:PTY (Program Type Identification) Search ¢Automatically tunes to a station that is currently broadcasting thespecified program type (genre).PS (Program Service Name) DisplayAutomatically displays the station name transmitted by the RDSstation.RDS AUTO MEMORY function ™Automatically selects and stores up to 40 RDS stations in the presetmemory.If fewer than 40 RDS stations have been stored in the preset memory,regular FM stations will be stored in the remaining places.Radio Text functionDisplays the radio text data transmitted by some RDS stations whenyou press the RDS DISP. key. There is "NO RT" display if no text datais transmitted.Using RDS (Radio Data System)The "RDS" indicator lights up when an RDS broadcast (signal) isreceived.Before using a function utilizing the RDS, be sure to perform the RDSAuto Memory operation by referring to the description in "PresettingRDS stations (RDS AUTO MEMORY)". ™NoteSome functions and function names may differ for certain countriesand areas.FMMHz STEREOAUTOTUNEDST.SWRLSPRDSMULTI CONTROLINPUT SELECTORBAND AUTOMULTICONTROLTUNERAUTOBANDTuning (non-RDS) radio stationsRadio stations can be classified into RDS (Radio Data System) stationsand other stations. To listen to or store RDS stations in the presetmemory, see the section entitled, "Using RDS"."AUTO" indicator lights.