5PreparationsDisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsBand indicators AUTO indicatorMEMO. indicatorST. indicatorTUNED indicator3 STEREO indicatorSTEREO indicatorNames and functions of partsFrequency display,Input display,Preset channel display,Surround mode displaySpeakers' indicatorPRO LOGICindicatorS.DIRECT indicatorMONITOR indicatorMUTE indicatorAUTO SOUND indicator DIGITAL indicatorStandby modeWhile standby indicator is lit, this receiver is in standby mode and consumes a small amount of current for back-up. This system can be switched ON by using the remotecontrol.1 POWER key ^Use to switch the main power ON/OFF.2 ON/STANDBY ( ) key ^Use to switch the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator3 MULTI CONTROL key ^Use to control a variety of settings.4 SET UP key ^Use to select speakers' settings etc.5 Surround indicatorsDOLBY DIGITAL indicator §Lights when the receiver is in the DolbyDigital mode.PRO LOGIC indicator §Lights when the receiver is in the PRO LOGICmode.3 STEREO indicator §Lights when the receiver is in the 3 STEREOmode.6 INPUT MODE key 7Use to switch between the digital and analoginputs.7 DIMMER key )•Use to adjust the brightness of the display.Use to select the REC MODE.8 MONITOR key (Use to monitor the source that is connectedto the VIDEO2/MONITOR jack.9 VOLUME CONTROL knob *0 PHONES jack (Use for headphone listening.! SPEAKER key &Use to turn the speaker ON/OFF.MUTE key (Use to temporarily mute the sound.@ SOUND key ¶Use to adjust the sound quality and ambienceeffects.# BAND key ¡Use to select the broadcast band.$ AUTO key ¡Use to select the auto tuning mode.% LISTEN MODE key §Use to select the listening mode.^ MEMORY key ™Use to store radio stations in the presetmemory.& SOURCE DIRECT key (Use to pass the source material direct to theamplifier.* INPUT SELECTOR knob *Use to select the input sources.RDS indicators DOWN MIX indicator