Kenwood KRF-V5010 Instruction Manual

Also see for KRF-V5010: Instruction manual Instruction manual Service manual Instruction manual

19OperationsKRF-V7010/V6010/V5010 (En/T)Presetting radio stations manually• Repeat steps 1, 2, 3 and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Press the MEMORY key while receiving the station.Proceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).Blinks for 5 seconds Lights for 5 seconds12Tune to the station you want to store.34Receiving preset stationsEnter the number of the preset you want to receive (up to"30").12Press the numeric keys in the following order:For "15", press .......... 0,5For "20", press .......... 0,0,)• If you make a mistake entering a two digit number, press the +10key several times to return to the original display and start again.Use the MULTI CONTROL to select one of the stationpresets (1 – 30).Press the MEMORY key to accept the setting.Use the remote control to select the tuner as the source.• The remote control switches to the tuner operating mode.The RDS auto memory function assigns preset numbers to RDSstations starting from preset number "1". Therefore, be sure to executethe RDS auto memory function before using the following operations tomanually store AM stations and other FM stations, and RDS stations.“Presetting RDS stations (RDS AUTO MEMORY)”. *MEMORYMULTI CONTROL01 8 ))9. FMMHz STEREOASPTUNEDMEMO.AUTOST.SWRL• When storing radio stations manually, it may take a few secondsbefore the "MEMORY" indicator appears in the display after press-ing the MEMORY key depending on receiving conditions.AUDIOTUNER1-0, +10RC-R0507 RC-R03071-0, +1015 8 ))9. FMMHz STEREOASPTUNEDMEMO.AUTOST.SWRLReceiving preset stations in order (P.CALL)• Each time you press the key, another preset station is received inorder.Pressing the P.CALL (%) key (¢) does the following:01=02=03= ...... 28=29=30=01=02=03=Pressing the P.CALL (fi) key (4) does the following:01+02+03+ ...... 28+29+30+01+02+03+Holding down the key, lets you skip through the presets, receiv-ing each for 0.5 seconds apiece.12Use the remote control to select the tuner as the source.• The remote control switches to the tuner operating mode.Use the P.CALL key to select the desired station.Listening to radio broadcastsAUDIOTUNERP.CALLP.CALLRC-R0507 RC-R0307