Kenwood KRF-V5050D Instruction Manual

Also see for KRF-V5050D: Instruction manual Instruction manual Service manual Service manual

Contents

21OperationsNormal playback1Listening to a source componentUse the INPUT SELECTOR knob to select the source youwant to listen to.The input sources change as shown below:Selecting a source using the INPUT SELECTOR knob.Adjusting the toneYou can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode.1 Press the SOUND key to select the tone mode to be adjusted.• The bass and treble levels are adjustable from -10dB to +10dB in 2step increments.• The adjustment item is displayed for approximately 8 seconds.2 Use the MULTI CONTROL keys to adjust the sound quality.BASS: Select this to adjust the low frequency range.(Press the SOUND key once.)TREB: Select this to adjust the high frequency range.(Press the SOUND key twice.)FMAMMHzkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUND AUTOLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSSWLSP A RSTEREOOnce-touch low frequency emphasis (bass boost)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes.Press the B. BOOST (BASS BOOST) key.• Press the key once to select the maximum (+10dB) low frequencyemphasis setting.• This key does not function when the receiver is in the sound quality orambience effects adjustment mode.Switching back to the previous settingPress the B. BOOST (BASS BOOST) key again.23Start playback from the selected source.Use the VOLUME CONTROL knob (VOLUME keys) to adjustthe volume.Selecting VIDEO 2/MONITORDepending on the component connected to the VIDEO 2/MONITORjacks, select either the “VIDEO 2” setting or the “MONITOR” setting, asappropriate.Adjusting the soundKRF-V5050D1 “PHONO”2 “TUNER”3 “CD/DVD”4 “TAPE” or “MD”5 “VIDEO1”if VIDEO2/MONITOR is VIDEO26 “VIDEO2”7 “DVD/6ch”else if VIDEO2/MONITOR is MONITOR6 “DVD/6ch”VR-517/KRF-V5550D1 “AUX”2 “TUNER”3 “CD/DVD”4 “TAPE” or “MD”5 “VIDEO1”if VIDEO2/MONITOR is VIDEO26 “VIDEO2”7 “DVD/6ch”8 “AV AUX” (VR-517 only)else if VIDEO2/MONITOR is MONITOR6 “DVD/6ch”7 “AV AUX” (VR-517 only)VR-506/KRF-V6050D1 “PHONO”2 “TUNER”3 “CD/DVD”4 “TAPE” or “MD”5 “VIDEO1”if VIDEO2/MONITOR is VIDEO26 “VIDEO2”7 “DVD/6ch”8 “AV AUX”else if VIDEO2/MONITOR is MONITOR6 “DVD/6ch”7 “AV AUX”RC-R0511INPUTSELECTORINPUT SELECTORVOLUME CONTROLVOLUMERC-R0615/R0617SOUNDVOLUME CONTROLSOURCE DIRECTPHONES SPEAKERS A/B(SPEAKER/MUTE)MULTI CONTROLMUTEBASS BOOST/B. BOOSTMULTICONTROLRC-R0615/R0617SOUNDRC-R0511VOLUME9VR-5051 “AUX”2 “TUNER”3 “CD/DVD”4 “TAPE” or “MD”5 “VIDEO1”if VIDEO2/MONITOR is VIDEO26 “VIDEO2”7 “DVD”else if VIDEO2/MONITOR is MONITOR6 “DVD”