Kenwood KRF-V5050D Instruction Manual

Also see for KRF-V5050D: Instruction manual Instruction manual Service manual Service manual

Contents

23Operations1 Use the INPUT SELECTOR to select the source (CD, DVD orVIDEO2) you want to record.2 Set the cassette deck or MD recorder to record.3 Press and hold the DIMMER key for more than 2 seconds toselect the A-REC or M-REC mode.1 Rec mode off : The digital input record mode isswitched off.2 A-REC : The digital input signals (DTS,Dolby Digital, or PCM) are identi-fied automatically and convertedinto stereo signals that are readyfor recording.3 M-REC : The input signal type at the mo-ment this mode is selected is heldthroughout this mode.Recording audio (digital sources)Switch on the REC mode to record a digital input source.Usually use the A-REC (Auto-Record) mode to record audio inputsources. When the digital mode changes during recording in the A- RECmode, the audio input source may be interrupted momentarily.4 Start playback, then start recording.Listening to radio broadcastsRecording video1 Use the INPUT SELECTOR to select the video source (other than“VIDEO1”) you want to record.2 Set the video deck connected to VIDEO 1 to record.• Select the REC MODE to record a digital input source.3 Start playback, then start recording.• Recording may not be normal for some video software. This is due tothe copy guard condition. ·Recording music in A-REC or M-REC mode• If the audio reproduction stops in the middle due to change in theinput signals, etc., press the DIMMER key.• The mode changes every 2 seconds as shown below.FMAMMHzkHz3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOPRO LOGICFMAMMHzkHz3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOPRO LOGICSTEREOSTEREODIGITALAUTO SOUNDDIGITALAUTO SOUNDFor M-REC mode:FMAMMHzkHz3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOPRO LOGICFMAMMHzkHz3DOWN MIXS.DIRECTMONITORDSPMEMOST.TUNEDAUTOPRO LOGICSTEREOSTEREODIGITALAUTO SOUNDAUTO SOUNDDIGITALAUTO SOUNDAUTO SOUNDFor A-REC mode:Tuning radio stationsThe receiver can store up to 40 stations in the memory and recall them byone-touch operation.RecordingINPUT SELECTORDIMMERRC-R0511 RC-R0615/R0617MULTI CONTROLINPUT SELECTORBAND AUTO/CINEMA EQ.MULTICONTROLTUNERAUTOBAND123Each press switches the tuning method as follows:4Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob (press the key) to select thedesired station.Each press switches the bandas follows:1 AUTO lit (auto tuning)2 AUTO not lit (manual tuning)Frequencydisplay“TUNED” is displayed when astation is received.• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)“AM” or “FM” indicatorappears in the displayUse the INPUT SELECTOR knob (TUNER key) to select thetuner.Use the BAND key to select the desired broadcast band.Use the AUTO/CINEMA EQ. key to select the desiredtuning method.Use the MULTI CONTROL keys to select the station.1 FM2 AM“ST.” lights when a broadcastis being received in stereo.AMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUNDFMMHz STEREOAUTOAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPMEMOST.TUNEDAUTO SOUNDFMMHz STEREOAUTOAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDMEMOFMMHz STEREOAUTOTUNEDST.“AUTO” indicator lights upin the display.