Kenwood KRF-V5050D Instruction Manual

Also see for KRF-V5050D: Instruction manual Instruction manual Service manual Service manual

Contents

24OperationsPresetting radio stations manually• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Press the MEMORY key while receiving the station.Proceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).Blinks for 5 seconds Lights for 5 seconds12Tune to the station you want to store.34Receiving preset stationsEnter the number of the preset station you want to receive(up to “40”).12Press the numeric keys in the following order:For "15", press .......... 0,5For "20", press .......... 0,0,)• If you make a mistake entering a two digit number, press the +10 keyrepeatedly to return to the original display and start again.Use the MULTI CONTROL keys to select one of the stationpresets (1 – 40).Press the MEMORY key again to confirm the setting.Press TUNER to select tuner as the source.AMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSFMMHz STEREOAUTOTUNEDST.MEMOSWRLSP AAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSFMMHz STEREOAUTOTUNEDST.SWRLSP AListening to radio broadcastsReceiving preset stations in order (P.CALL)• Each time you press the key, another preset station is received inorder.Pressing the P.CALL ¢ does the following:=01=02=03= ... = ... 38=39=40Pressing the P.CALL 4 does the following:01+02+03+ ... + ... 38+39+40+Holding down the ¢ or 4 key, lets you skip through thepresets, receiving each preset station at 0.5 second intervals.12Press TUNER key to select the tuner as the source.Use the P.CALL 4/ ¢key to select the desired station.MULTI CONTROLMEMORYRC-R0511TUNERRC-R0615/R0617Numeric keysRC-R0615/R0617RC-R0511TUNERP.CALL4/¢