Kenwood KRF-V5080D Instruction Manual

Also see for krf v5080d: Instruction manual Instruction manual Service manual

16 ENENGLISHPreparing for surround sound6Adjust the LFE (Low Frequency Effects) level1 Select the LFE LEVEL from the set up displays and press theSETUP key again.2 Use the MULTI CONTROL Knob or MULTI CONTROL %/fi keysto adjust the LFE LEVEL.• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB stepdecrements.3 Press the SETUP key to accept the setting.4 Setup is complete when the EXIT indication appears.• The speakers you have selected should appear on the display.Confirm that all the speakers have been correctly selected.5 Press the SETUP key to exit the SETUP mode.Input level adjustment (analog sources only)If the input level of an analog source signal is too high, the CLIP indicatorwill blink to indicate the source signal. Adjust the input level.1 Use the INPUT SELECTOR knob to select the source of which theinput level you want to adjust.• You can store a separate input level for each input source.2 Press the SOUND key repeatedly until the “INPUT” indicationappears.3 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys toadjust the input level.• The input level may be adjusted to any one of three settings: 0dB,-3dB, and -6dB. (The initial setting is 0dB.)4 Press the SOUND key again to return to the input indication.