Kenwood KRF-V5080D Instruction Manual

Also see for krf v5080d: Instruction manual Instruction manual Service manual

5 ENENGLISHON OFFPOWERPHONESSPEAKERS ON/OFFON/STANDBYSTANDBYACTIVE EQACTIVE EQ DTS DOLBY DIGITALINPUT MODE BAND AUTO MEMORY SETUPMUTEDOWN UPMULTI CONTROL INPUT SELECTORVOLUME CONTROLSOUNDDIMMER LISTEN MODENames and functions of partsMain UnitStandby modeWhile the standby indicator is lit, a small amount of power is supplied tothe system to back-up the memory. This is called standby mode. Underthe condition, the system can be turned ON by the remote control unit.DisplayInput channel indicatorsBand indicatorsNEO:6indicatorFrequency display,Input display,Preset channel display,Surround mode displaySpeaker indicatorPRO LOGICindicatorAUTO DETECT indicatorDOLBY DIGITALindicatorDTS indicatorCLIP indicatorMUTE indicatorTONE indicatorLOUDNESS indicatorDSP MODEindicatorDIGITAL indicator6CH INPUTindicatorCAUTIONThe power in this equipment will not be completely cut off from the ACwall outlet when the main switch is turned OFF.RDS indicatorPTY indicator AUTO indicatorST. indicatorTUNED indicatorDISCRETE 6.1indicatorMATRIX 6.1indicator1 POWER ON/OFF key $Use to turn the main power ON/OFF.2 ON/STANDBY key $Use to switch the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator3 DIMMER keyUse to select the REC MODE. (Use to adjust the brightness of the display.¶4 LISTEN MODE key ∞Use to select the listening mode.5 Surround LED (light-emitting diode)indicatorsACTIVE EQ mode LED indicator *Lights when the receiver is in the ACTIVE EQmode.DTS mode LED indicator ∞Lights when the receiver is in the DTS mode.DOLBY DIGITAL EX mode LED indicator∞Lights when the receiver is in the DolbyDigital EX mode.6 SOUND key ¶Use to adjust the sound quality and theambience effects.7 MULTI CONTROL knob $Use to control a variety of settings.8 INPUT SELECTOR knob &Use to select the input sources.9 VOLUME CONTROL knob &0 PHONES jack *Use for headphone listening.! SPEAKERS ON/OFF key &Use to turn the speakers ON/OFF.@ ACTIVE EQ key *Use to select ACTIVE EQ setting.# INPUT MODE key 7Use to switch between full auto, digital andanalog inputs.$ BAND key )Use to select the broadcast band.% AUTO keyUse to change “TAPE” indication to “MD”.&Use to select the auto tuning mode. )^ MEMORY key ™Use to store radio stations in the presetmemory.& SETUP key $Use to select the speakers' settings etc.* MUTE key *Use to temporarily mute the sound.