Kenwood KRF-V6060D Instruction Manual

Also see for KRF-V6060D: Instruction manual Service manual Service manual

2 ENUnits are designed for operation as follows.U.S.A. and Canada ........................................... AC 120 V onlyAustralia ........................................................... AC 240 V onlyEurope and U.K. ............................................... AC 230 V onlyChina and Russia ............................................. AC 220 V onlyOther countries .......... AC 110-120 / 220-240 V switchable*For the United KingdomFactory fitted moulded mains plug1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.2. The fuse cover must be refitted when replacing the fuse in themoulded plug.3. Do not cut off the mains plug from this equipment. If the plug fittedis not suitable for the power points in your home or the cable is tooshort to reach a power point, then obtain an appropriate safetyapproved extension lead or adapter, or consult your dealer.If nonetheless the mains plug is cut off, remove the fuse anddispose of the plug immediately, to avoid a possible shock hazardby inadvertent connection to the mains supply.IMPORTANT: The wires in the mains lead are coloured in accordancewith the following code:Blue : NeutralBrown : LiveDo not connect those leads to the earth terminal of a three-pin plug.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENSafety precautionsWARNING :TO PREVENT FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TOALERT THE USER TO THE PRESENCE OF UNINSULATED“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S EN-CLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TOCONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-ENCE OF IMPORTANT OPERATING AND MAINTENANCE(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-PANYING THE APPLIANCE.Before applying the power Caution : Read this page carefully to ensure safeoperation.* AC voltage selectionThe AC voltage selector switch on the rear panel is set to the voltagethat prevails in the area to which the unit is shipped. Beforeconnecting the power cord to your AC outlet, make sure that thesetting position of this switch matches your line voltage. If not, itmust be set to your voltage in accordance with the following direction.VOLTAGE SELECTORAC 110-120V~AC 220-240V~Note:Our warranty does not cover damage caused by excessive linevoltage due to improper setting of the AC voltage selector switch.AC voltage selector switchMove switch lever tomatch your line voltagewith a small screwdriveror other pointed tool.