Kenwood KRF-V6060D Instruction Manual

Also see for KRF-V6060D: Instruction manual Service manual Service manual

22 ENMuting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.LSL S SB SRC RMUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODE DA B CLIPAUTO DETECTSWLFESPBlinksTo cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the VOLUMECONTROL knob or pressing VOLUME +/– keys.ACTIVE EQ modeYou can enjoy a more impressive sound effect when ACTIVE EQ isturned ON during Dolby Digital and DTS playback and, when in PCM andanalog stereo mode.Press the ACTIVE EQ key for the following selections;1 ACTIVE EQ MUSIC : Effective when listening to music.(The ACTIVE EQ indicator lights up.)2 ACTIVE EQ CINEMA : Effective when watching a movie.(The ACTIVE EQ indicator lights up.)3 ACTIVE EQ TV : Effective when watching TV.(The ACTIVE EQ indicator lights up.)4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.(The ACTIVE EQ indicator goes off.)• “ACTIVE EQ” will scroll from right to left.• When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ONautomatically.• ACTIVE EQ function will not be available when REC MODE, AUTOTUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback.SPEAKER EQ modeSPEAKER EQ’s function will automatically detect the various features ofeach speaker and effectively creates a stereoscopic sound effect.Press the SPEAKER EQ key to switch the following setting;1 SPEAKER EQ SMALL : To select a small size speaker.(The SPEAKER EQ indicator lights up.)2 SPEAKER EQ NORMAL : To select an average size speaker.(The SPEAKER EQ indicator lights up.)3 SPEAKER EQ LARGE : To select a large size speaker.(The SPEAKER EQ indicator lights up.)4 SPEAKER EQ OFF : The SPEAKER EQ function is turnedOFF.(The SPEAKER EQ indicator goes off.)• “SPEAKER EQ” will scroll from right to left.• SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON.• SPEAKER EQ function will not be available when REC MODE, AUTOTUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback.Listening with headphones1 Press the A and B Speaker keys so that the speaker indicatorgoes off.Make sure the SPEAKERSindicators are turned off.SL S SB SRSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODE DA B CLIPAUTO DETECTLFE• If you turn off all of the speakers when in surround mode, the surroundmode will be canceled as well, resulting in stereo playback.2 Connect headphones to the PHONES jack.PHONES3 Use the VOLUME CONTROL knob or VOLUME +/– keys to adjustthe volume.Normal playbackAdjusting the soundLOUDNESSTONE BASS BOOSTTONEVOLUMECONTROLMUTEA SPEAKERS BSPEAKER EQ ACTIVE EQPHONES LOUDNESSMULTI CONTROLVOLUME /POWERSPEAKER EQACTIVE EQMUTEJoystick(MULTI CONTROL 5 / ∞,DOWN 2 / UP3)Adjusting the TONEYou can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode.1 Press the TONE key to select the TONE mode.2 Use the MULTI CONTROL knob or Joystick (5/∞) to select TONEON/OFF.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE3 When in TONE ON selection, press the TONE key for the followingdisplays.BASS : Select this to adjust the low frequency range.TREBLE : Select this to adjust the high frequency range.4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust thesound quality.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.• The adjustment item is displayed for approximately 8 seconds.Once-touch low frequency emphasis (BASS BOOST)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes.Press the BASS BOOST key.• Press the key once to select the maximum (+10) low frequencyemphasis setting.• This key does not function when the receiver is in the sound qualityor ambience effects adjustment mode.Switching back to the previous settingPress the BASS BOOST key again.Adjusting the LOUDNESS modeYou can adjust the Loudness function which controls the low volumesettings to maintain the music's richness. The adjustment can be madewhen the receiver is in the PCM stereo and analog stereo mode.Press the LOUDNESS key to turn the LOUDNESS setting ON.To cancelPress the LOUDNESS key again so that the “LOUDNESS” indicatorgoes off.