Kenwood KRF-V6070D Instruction Manual

Also see for VR-707: Service manual Instruction manual Quick start guide

Kenwood KRF-V6070D Instruction Manual Manual pdf 21 page image

21 ENRecording3 Press and hold the DIMMER key for more than 2 seconds to selectthe A-REC or M-REC mode during digital input.1 Rec mode off : The digital input record mode is switched off.2 A-REC mode : The digital input signals (DTS, Dolby Digital,or PCM) are identified automatically andconverted into stereo signals that are readyfor recording.3 M-REC mode : The input signal type at the moment thismode is selected is held throughout thismode.For A-REC mode:For M-REC mode:4 Start playback, then start recording.• If the audio reproduction stops in the middle due to change in theinput signals, etc., press the DIMMER key.Listening to radio broadcastsThe receiver can store up to 40 stations in the memory and recall themby one-touch operation.Tuning radio stations“AM” or “FM” indicatorappears in the display“AUTO” indicator lightsup in the display.1Use the INPUT SELECTOR knob or TUNER key to select thetuner.2Use the BAND key to select the desired broadcast band.Each press switches the bandas follows:1 FM2 AM3Use the AUTO key to select the desired tuning method.Each press switches the tuning method as follows:1 AUTO lit (auto tuning)2 AUTO not lit (manual tuning)• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or Multi %/ fikeys, or Tune– 1/ + ¡keys to select the station.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob (press the key) to select the desiredstation.Frequencydisplay“TUNED” is displayedwhen a station is received.“ST.” lights whena broadcast is beingreceived in stereo.4¢ + ++MULTI CONTROLINPUT SELECTORBAND AUTOTUNERAutoBandTune – 1 / + ¡Multi % / fi