Kenwood KRF-V6070D Instruction Manual

Also see for VR-707: Service manual Instruction manual Quick start guide

Kenwood KRF-V6070D Instruction Manual Manual pdf 4 page image

4 ENBefore applying the power4¢ + ++6 mPOWERRCVROperationWhen the STANDBY indicator is lit, the power turns ON when you pressthe POWER RCVR key on the remote control. When the power comesON, press the key you want to operate.• When pressing more than one remote control key successively,press the keys securely by leaving an interval of 1 second or morebetween keys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.Preparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.• Insert two AA-size (R6) batteries as indicated by the polarity markings.Operating range(Approx.) Remote sensorInfrared ray systemChannel space switching(Except for the U.S.A., Canada and Australia)The space between radio channels has been set to the one thatprevails in the area to which the system is shipped. However, if thecurrent channel space setting does not match the setting in the areawhere the system is to be used, for instance when you move fromarea 1 or area 2 shown in the following table or vice versa, properreception of AM/FM broadcasts cannot be expected. In this case,change the channel space setting in accordance with your area byreferring to the following table.Turn the power OFF by pressing the POWER key before moving theswitch level. Move the switch lever to match your area with a smallscrewdriver or other pointed tool, then turn the power ON again.1.2.CHANNELSpace FrequencyAreaU.S.A., Canada and SouthAmerican countriesOther countriesFM: 100 kHzAM: 10 kHzFM: 50 kHzAM: 9 kHzDEEMCHSP50μAM 9kHFM 50kHDE-EMPHASISCHANNEL SPACE50usAM 9kHzFM50kHz75usAM 10kHzFM100kHz50usAM 9kHzFM50kHz75usAM 10kHzFM100kHzDE-EMPHASISCHANNEL SPACEMemory back up functionPlease note that the following items will be deleted from the unit'smemory if the power cord is disconnected from the AC outlet forapproximately 1 day.• Power mode. • SUBWOOFER ON/OFF.• Input selector settings. • SW RE-MIX ON/OFF.• Picture output. • Distance setting timer.• Speaker ON/OFF. • Input mode setting.• Volume level. • Midnight mode setting.• BASS, TREBLE, INPUT level. • PRO LOGIC II mode setting.• TONE ON/OFF. • Broadcast band.• LOUDNESS ON/OFF. • Frequency setting.• Dimmer level. • Preset stations.• MD/TAPE settings. • Tuning mode.• Listen mode setting. • ACTIVE EQ mode.• SP SYSTEM. • DSP mode.• Speaker settings.