39 ENENGLISHIn case of difficultyRemote control unitCause• No setup codes registered at the respectiveinput(s).• The remote control is set to a differentoperation mode.• Batteries are exhausted.• The remote control unit is too far away fromthe main system, controlling angle is toolarge, or there is an obstacle between thereceiver and the remote.• The audio cords and system control cords arenot connected properly.• No tape or CD is placed in the sourcecomponent.• An attempt is made to play a tape which isbeing recorded in the cassette deck.• The remote control has not been set to theoperation mode for the component you wishto control.Remedy• Register a setup code at the respectiveinput(s). ⁄• Press any of the Input Selector keys to selectthe appropriate operation mode.• Replace with new batteries.• Operate the remote control unit within thecontrollable range.• Connect properly referring to “Setting up thesystem”.• Place the tape or CD in the source componentwhich you want to play.• Wait for recording to complete.• Press any of the source keys or SRC Powerkey to activate the operation mode for thecomponent you want to control beforeoperation. ºSymptomCertain inputs cannot be selected using theremote control.Remote control operation is not possible.
