4 ENENGLISHBefore applying the power4¢ + ++6 mPOWERRCVROperationWhen the STANDBY indicator is lit, the power turns ON when you pressthe POWER RCVR key on the remote control. When the power comesON, press the key you want to operate.• When pressing more than one remote control key successively,press the keys securely by leaving an interval of 1 second or morebetween keys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.Preparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.• Insert two AA-size (R6) batteries as indicated by the polarity markings.Operating range(Approx.) Remote sensorInfrared ray systemUnpackingUnpack the unit carefully and make sure that all accessories arepresent.FM indoor antenna (1) AM loop antenna (1)Remote control unit (1) Batteries (R6/AA) (2)RC-R08254¢+If any accessories are missing, or if the unit is damaged or fails to operate,notify your dealer immediately. If your unit was shipped to you directly,notify your shipper immediately. Kenwood recommend that you retainthe original carton and packing materials in case you needs to move orship the unit in the future.Keep this manual handy for future reference.
