Kenwood KRF-V6070D Instruction Manual

Also see for KRF-V6070D: Service manual Instruction manual Instruction manual

Contents

40 ENENGLISHFor your recordsRecord the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product.Model_____________________ Serial Number_____________________Specifications Caution : Read this page carefully to ensure safeoperation.AUDIO sectionRated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω)............................................................................... 100 W + 100 WEffective power output during SURROUND operationFRONT (1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)............................................................................... 100 W + 100 WCENTER (1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven).............................................................................................. 100 WSURROUND (1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)............................................................................... 100 W + 100 WSURROUND BACK (1 kHz, 0.7 % T.H.D. at 6 Ω one channeldriven) .................................................................................. 100 WTotal harmonic distortion ......................... 0.05 % (1 kHz, 50 W, 6 Ω)Frequency response (IHF’66)CD/DVD ..................................... 20 Hz ~ 70 kHz, +0 dB ~ –3.0 dBMaximum input levelPHONO (MM) ................................ 40 mV, 1.0 % T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 74 dBCD/DVD, TAPE, VIDEO 1, VIDEO 2, DVD/6CH .................. 95 dBLoudness controlVOLUME at –30 dB level ...................................... +8 dB (100 Hz)Input sensitivity / impedancePHONO (MM) ........................................................ 7.5 mV / 27 kΩCD/DVD, TAPE, VIDEO 1, VIDEO 2, DVD/6CH.............................................................................. 550 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS-VIDEO inputs /outputsS-VIDEO (luminance signal) .................................. 1 Vp-p / 75 ΩS-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (DIN at 75 Ω)MONO ..................... 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO ................... 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN at 1 kHz)MONO .......................................................... 0.2% (71.2 dBf input)STEREO ....................................................... 0.8% (71.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ................................. 65 dB (40 kHz DEV., 71.2 dBf input)STEREO .............................. 60 dB (46 kHz DEV., 71.2 dBf input)Stereo separation (DIN 1 kHz) ................................................... 36 dBSelectivity (±300 kHz) ................................................................. 64 dBFrequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range .................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz).................................................................. 50 dB (60 dBμV EMF input)GENERALPower consumption ................................................................. 280 WAC outletSWITCHED ........................................................ (total 90 W max.)Dimensions .................................................... W: 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net) ............................................................ 8.5 kg (18.74 lb)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).