Kenwood KRF-V6400D Instruction Manual

Also see for KRF-V6400D: Service manual

Contents

Kenwood KRF-V6400D Instruction Manual Manual pdf 26 page image

26 KRF-V6400D/KRF-V5450DSetupThe HDMI setup is required to use the component connected tothe HDMI terminal or to use the HDMI control functions.MULTI CONTROLO/HDMI SETUPHDMI SETUPMULTI CONTROLHDMI setup flowHDMI setup flowThe HDMI control functions can be set.1 Enter the HDMI Setup mode.[HDMI SETUP]Use [MULTI CONTROL ∞/5] to select an item to set.[HDMI SETUP]Display Setting"AUDIO OUT" Sets the HDMI audio output destination."LIP SYNC" (KRF-V6400D only) Adjusts the deviation in time betweenthe output audio and video."LINK SET" Sets whether or not the HDMI controlfunctions are used."POWER CONTROL"*1 Interlocks power ON-OFF of componentsby means of HDMI control."EXIT" Exits the HDMI Setup mode.* 1 This item can be set when "LINK SET" is set to "ON".2 Set each item.See the followings for each HDMI control item.Audio OutAudio OutThis function selects whether the output destination of the audioinput is the TV or this unit.1 Select "AUDIO OUT".[HDMI SETUP]Use [MULTI CONTROL ∞/5].[HDMI SETUP]2 Set the HDMI audio output destination.[MULTI CONTROL ∞/5][HDMI SETUP]Display Setting"AMP" Outputs the audio from the speakers connected to this unit."TV" Outputs the audio from the TV connected to this unit.3 Go to the next setting.• If "TV" is selected and the audio is not output or isinterfered with by noise, set the audio output of theplayer component to PCM.• If "TV" is selected, adjust the volume on TV.HDMI setup